MMM V3 - First Run Opinions

[George16]

Originally Posted by Pdelcast

I think we need less power -- our test motor for high power testing was a Neu 1521/1D -- on 6S. NEVER TRY THAT AT HOME. I'M SERIOUS.

We broke so many transmission and gearing parts -- seems every run we would get 2-3 passes and then something in the drive train would fail.

Any videos? It would be really nice to see a 1521 on 6S .

By the way, any thoughts on installing a pair of capacitors on the V3?

[macr0w]

I ran my MMMv3 in my new MBX-6 this past Sunday with a 1512/2.D/F and a 5000mah 25c Polyquest.

It ran great for three 6 minute qualifiers and a 20 minute main.

That's the most I've gotten out of an MMM since it came out. And I've been through 6 of them.

This may be the one fellas.

It felt smooth and it stayed together. That's all I can ask of it.

[e-mike]

Originally Posted by macr0w

I ran my MMMv3 in my new MBX-6 this past Sunday with a 1512/2.D/F and a 5000mah 25c Polyquest.

It ran great for three 6 minute qualifiers and a 20 minute main.

That's the most I've gotten out of an MMM since it came out. And I've been through 6 of them.

This may be the one fellas.

It felt smooth and it stayed together. That's all I can ask of it.

nicenow its seems that the v3 old on for the first 40minutes un runtime...let see at long term use

so am i right that we should just use the internal bec and dont do any mods to the v3?

[e-mike]

Originally Posted by bustitup

so am i right that we should just use the internal bec and dont do any mods to the v3?

now for the v3 the bec problem seem to be fixed....and no mod neededjust open the case to look if the fan wire isn't pinched...

[Unsullied_Spy]

Originally Posted by George16

Any videos? It would be really nice to see a 1521 on 6S .

By the way, any thoughts on installing a pair of capacitors on the V3?

Check it out.