bustitup crt.5 build

i'm pretty sure that rooter and blackedoutrevo and some others are close to solving this and yes i would run a 17mm buggy wheel with with 1/2" offset.....but only with mikes new extended chassis which is supposed to be longer than his last.......1/8th buggy tires are about 4" tall...perfect

[yappa]

My Crt is fit for 17mm Hex

I built 4 Adapters for Buggy Wheels
Rear 20mm and front 15mm

Look









So you can get so fast as a 1/8 Nitro

Originally Posted by yappa

My Crt is fit for 17mm Hex

I built 4 Adapters for Buggy Wheels
Rear 20mm and front 15mm

So you can get so fast as a 1/8 Nitro

link to these parts please

well i shifted things around a little bit ...thing looks sweet with anacondas...also stuck in vxl temp till the 9l gets here......very fast and wheelies on damand

[yappa]

Originally Posted by bustitup

link to these parts please

Hi
This are my own Produkts
I make it on my engine lathe at home