My Gmaxx build

[lincpimp]

If you are running a neu, adjust the timing to MID. That cured my hesitation problems.

[George16]

Originally Posted by lincpimp

If you are running a neu, adjust the timing to MID. That cured my hesitation problems.

The timing is set at mid. I think the cogging was due to the LVC kicking in. I charge the batteries last night and prior to charging, I noticed the voltage to be at 10.45V. I set the LVC cutoff at 19.2V.

Originally Posted by TDC57

WOW that's some mighty nice soldering SIR.. I whish i could do that...

Thanks Shaun. Video won't be until this weekend once my son decides to go out with me. I just soldered the other pair of caps killajb sent to me and I plan on installing it on the MMM. Has anybody installed caps on the V3 yet?