Quote:
Originally Posted by Unsullied_Spy
9L is available with both, definitely go for the 5mm though.
Mike's heatsink clamp is a very good upgrade for it. It'll help hold the motor together through all the rough stuff and help with cooling.
|
I know it is available with either shaft. My question was directed to rawfuls and his specific motor. He asked if stock gearing would be useable. Not sure if he checked to see what shaft the 9l has. The stock e-sav pinions are 32p and 1/8 bore.
The clamp is a good idea as the endbells tend to come off...
Hybrid Mode
