E revo direct drive out runner

[Lonewolf039]

Here is how I did a DD setup. This is the easiest IMO.

Made brackets out of 1/4 inch aluminum for the center diff.


Drilled two holes for the front bracket and bolted the rear in using the tranny holes.


I used the stock front drive shaft and an axle shaft for the rear.


Slap on battery holders of choice.

And you have a kick ass E-Revo.

Build thread here if your interested.

[BL_RV0]

Nice, but in this case that's not direct drive. That's direct drive to a centre diff.