Does anyone make a plastic spur for the crt.5?

[hoovhartid]

what about using plastic pinion gears?

[riceman]

Originally Posted by hoovhartid

what about using plastic pinion gears?

Plastic will not last. There is a reason all the pinions and CBs made to mesh with metal spurs are hardened.

[hoovhartid]

Originally Posted by riceman

Plastic will not last. There is a reason all the pinions and CBs made to mesh with metal spurs are hardened.

i figured as much, but I saw these (the brass reinforced ones) and it got me wondering;
http://home.ptd.net/~kershawd/Kersha...inionsMod1.htm

[lincpimp]

Originally Posted by hoovhartid

i figured as much, but I saw these (the brass reinforced ones) and it got me wondering;
http://home.ptd.net/~kershawd/Kersha...inionsMod1.htm

I had some of those left over from my brushed motor days. They did not work well with anything brushless... We easily ripped the teeth of them with a 9l on 3s in an emaxx.

[hoovhartid]

Originally Posted by lincpimp

We easily ripped the teeth of them .

well.....pimpin' aint easy.



lol, thanks for the heads up

[lincpimp]

Originally Posted by hoovhartid

well.....pimpin' aint easy.



lol, thanks for the heads up

No prob...