Losi 1/8 Xcelorin system vs. MMM and a Neu

[marzac2]

Will be running it at the races again this weekend.

Fingers crossed!

[lutach]

Originally Posted by marzac2

Will be running it at the races again this weekend.

Fingers crossed!

My fingers will be crossed too .

[marzac2]

Originally Posted by lutach

My fingers will be crossed too .

I was actually being sarcastic. I have ran it on 6S using the internal BEC with NO problems, Temps fine, for more than 20 battery packs (approx 10-20 min each run).

Just need to check the firmware update to get the brakes shut off.

Also would love to see Losi up the "cut-off" voltage to higher values (for 6S). I know they most likely wont.

I will continue to update you all as things progress though.

[Ryu James]

Originally Posted by marzac2

I was actually being sarcastic. I have ran it on 6S using the internal BEC with NO problems, Temps fine, for more than 20 battery packs (approx 10-20 min each run).

Just need to check the firmware update to get the brakes shut off.

Also would love to see Losi up the "cut-off" voltage to higher values (for 6S). I know they most likely wont.

I will continue to update you all as things progress though.

thanks Marzac. keep us updated.

[florianz]

Hey,
are there any news about the brakes? does the esc really work on 6s??? how are the brakes in general? I am thinking about getting myself one, I think its good value for money, as long as it works with 6s (with a 1600kv motor) and the brakes are good. I have two 5s and 2 6s lipos.
I am currently using a cheapo 200a-china-esc, which is quite ok, except the brakes.
many thanks