LOSI 8T 10S Rocket...........

Originally Posted by Takedown

You might set a record with this. I think jzemaxx's record was 81mph with his MMT on 12s. Weve got to see a video of this thing in action.

This was a interesting thread to say the least. Sorry about the motor thing it sux I know....anyway about the above comment by Takedown, what and where are these "records" that we are talking about. I just want to do some research. BTW someone mentioned that foams were not allowed but produced higher speeds? Where do I get foams precut/trimmed true. I myself am after some high speeds as well and I am new to 1/8 scale brushess. Any schooling would be helpful. I will start a thread when I get all my shipments in, but we are working on putting together the order in the "brushless" thread.

We need more pics and vids when you get up and running. Please keep us posted on the progress.

BTW the reason I asked about the record was b/c this is the vid that got me into the 1/8 scale buggies for BL.

http://www.youtube.com/watch?v=GKctWzmIgVc
And it sure does not look like he's running 10's or 12's. Any info on this set-up would enlighten me.

Just wanted to say hello and wish you more luck on your project.

Have a good one,
Paul

[speedracer1129]

Originally Posted by BL Dreamer

This was a interesting thread to say the least. Sorry about the motor thing it sux I know....anyway about the above comment by Takedown, what and where are these "records" that we are talking about. I just want to do some research. BTW someone mentioned that foams were not allowed but produced higher speeds? Where do I get foams precut/trimmed true. I myself am after some high speeds as well and I am new to 1/8 scale brushess. Any schooling would be helpful. I will start a thread when I get all my shipments in, but we are working on putting together the order in the "brushless" thread.

We need more pics and vids when you get up and running. Please keep us posted on the progress.

BTW the reason I asked about the record was b/c this is the vid that got me into the 1/8 scale buggies for BL.

http://www.youtube.com/watch?v=GKctWzmIgVc
And it sure does not look like he's running 10's or 12's. Any info on this set-up would enlighten me.

Just wanted to say hello and wish you more luck on your project.

Have a good one,
Paul

Thanks Paul!! Ok, here goes..........

First, here are some links for "high speed records"

http://fastestrc.blogspot.com/

http://www.rc-isc.com/

Next, about the foams...... Everyone is trying to follow the ROSSA rules setup by the guys in the UK who came with them so everyone can have a standard to go by. For MT you can not use foams because they are not tall enough. I believe the class says the tires need to be at least 5.5 inches, not sure. When you surf the above sites, you will find the correct info.

Lastly, your inspiration is quite an ingenious system!! That buggy is running on 4S. HOWEVER.........................his trick is that he custom mounted a Savage 3 speed tranny to basically create an "overdrive" to the spur gear creating more rpm than if it were to be connected directly to the diff. Thus creating higher rpm and a higher top end. I definately take my hat off to that guy!! He was thinking WAYYYYYY out of the box!!

Good Luck!

[speedracer1129]

Well Guys,

They say a picture is worth a thousand words so I will share a few and I think you can sum it up

Saturday delivery with USPS is a great thing!!

[BL_RV0]

Originally Posted by speedracer1129

Well Guys,

They say a picture is worth a thousand words so I will share a few and I think you can sum it up

Saturday delivery with USPS is a great thing!!

What's with the long rear shaft on the 80mm Medusa? Are all of them like that? Do u think it would be long enough to hook a driveshaft to it for direct drive?

[BL_RV0]

Why? At 4 pole they would not be torquey enough to pull a truck around without any gear reduction except for the diffs.

I don't know, i know nothing about direct drive. Is it even possible without an outrunner?

[speedracer1129]

Originally Posted by Fast5sRevo88

What's with the long rear shaft on the 80mm Medusa? Are all of them like that? Do u think it would be long enough to hook a driveshaft to it for direct drive?

No, definately too short to mount an outdrive.

[sikeston34m]

Originally Posted by speedracer1129

No, definately too short to mount an outdrive.

Just how long is that little nubby?

Appears to be about 5mm or maybe 6mm long. Perhaps long enough to mount a coupler of some sort.

[speedracer1129]

Originally Posted by sikeston34m

Just how long is that little nubby?

Appears to be about 5mm or maybe 6mm long. Perhaps long enough to mount a coupler of some sort.

That is about right. I was actually thinking about mounting a plastic fan on it to aid in cooling since the wires come out on the side.

Lastly, your inspiration is quite an ingenious system!! That buggy is running on 4S. HOWEVER.........................his trick is that he custom mounted a Savage 3 speed tranny to basically create an "overdrive" to the spur gear creating more rpm than if it were to be connected directly to the diff. Thus creating higher rpm and a higher top end. I definitely take my hat off to that guy!! He was thinking WAYYYYYY out of the box!!

Good Luck![/QUOTE]

I like custom....is there a link to the build. I was thinking those lipos were at least two 3s...I mean those must be 8000 mah 2s if they are because they are quite meaty.

Anyway. I am in search of the right motor and very very very interested in your maiden voyage with the medusa. I have looked at the MMM combo and the neu 1512. Since you have experience with both I am really excited to get your feedback so I can complete my order. I am thinking the lower KV motors will be more versatile for my bashing application. I am thinking that the speed runs will be short lived for me if I go through TOO many parts. But still want to have some fun.

Thankyou very much for the link on the records. I will not be attempting just curious.

Hey can I get pre-cut foams for this baby somewhere??
I say pre cut because I cant true a foam for my life.