New to Lipo, need charging help

[thephilonator]

well done on an excdellent buy. i have exactly the same charger but the 3s version of the lipos you have. only gripes i have are that the charger doesn't come with a manual, but you can just print it off the net, and the zippyH's balence lead is a bit short.

so charging your lipo, like so:

connect Accucell8 to power supply>press "batt type/stop" button to scroll thru modes, you want 'lipo charge ' or something similar>press + or - bottons to scroll lipo charge modes-charge,balence,storage, etc. you want charge>enter button>adjust charge amps and pack voltage with + and- buttons>enter button for 3 seconds>it will then detect how many cells there are. then it will say somethinf like: R:4ser S:4ser. if you've done it right.>enter>it should start chargeing

at any time during the charge, you can press the + button to see individual cell voltages.

hope that helps.