Diffs for MMM on 5s?

[A RC Dude]

Mmk, i currently have 3.3 t-maxx diffs in my e-maxx. I'm getting a 5s zippy lipo and i just got a MMM 2200kv cambo. Will these daffs be able to hold up to a MMM on 5s? if not, what ahould i get?

i have the stock replacment FLM bulks and revo style sliders to the wheels with the FLM extended chassie dogbone going to the rear and a traxxas CVD to the front.

as long as you don"t try anything crazy they should be fine, I would go with the stock diffs and if they don"t hold up then try upgrading them

IIRC, 3.3 diffs are same as 2.5 diffs, just have the 4 screw plastic case versus the 2 screw diff case of the 2.5s. If thats right, you're a little better off, but not as strong as the 16.8 Emaxx diffs that are supposed to be brushless ready.

Upgrade to 16.8 diffs - available on Ebay, what I put in my old style 3906 Emaxx, but I converted over to all the 3.3 stuff from bulks out. That may be all you need to do.

I worried about this same issue (diff esc and motor) and I popped for a set of the FLM hybrids and ofna diffs and I know those won't have probs. But for the cost, they better not have any!!

[A RC Dude]

Originally Posted by Duster_360

IIRC, 3.3 diffs are same as 2.5 diffs, just have the 4 screw plastic case versus the 2 screw diff case of the 2.5s. If thats right, you're a little better off, but not as strong as the 16.8 Emaxx diffs that are supposed to be brushless ready.

Upgrade to 16.8 diffs - available on Ebay, what I put in my old style 3906 Emaxx, but I converted over to all the 3.3 stuff from bulks out. That may be all you need to do.

I worried about this same issue (diff esc and motor) and I popped for a set of the FLM hybrids and ofna diffs and I know those won't have probs. But for the cost, they better not have any!!

Thanks! it was a 2.5 maxx to begin with. that's why i got the 3.3 diffs. this was before the new e-maxx came out

[messcafe]

will if you ever need to upgrade the diffs let me know becaues im salling my flm hybrid bluk with the hotbodies diff onlay with 3/4 a gallon on them.

[Arct1k]

Hostly most likely you will shred them pretty soon... The revo ones couldn't take a 6s2p A123 Neu 1515/2.5d setup even with Ali inner and outers.

[Semi Pro]

they wont last long, mine didnt with the 1515 1y on 5 cell

i modded in lst2 diffs, its easy and cheep, i have afew extras pm for a price if you want them, i can show you how to do it

[_paralyzed_]

I have diffs with aluminum cups and aluminum cases for sale. silver or black. pm me for price.

[A RC Dude]

Originally Posted by messcafe

will if you ever need to upgrade the diffs let me know becaues im salling my flm hybrid bluk with the hotbodies diff onlay with 3/4 a gallon on them.

No thanks, I should be able to find some that will work fine for less of a price

Originally Posted by Semi Pro

they wont last long, mine didnt with the 1515 1y on 5 cell

i modded in lst2 diffs, its easy and cheep, i have afew extras pm for a price if you want them, i can show you how to do it

Yea, i talked to lincpimp about putting lst diffs in my maxx and he said that with revo style sliders, i'd have to get like $25 of RCM adapters to run them. This correct? Concidering who said it, i bet so.

Originally Posted by _paralyzed_

I have diffs with aluminum cups and aluminum cases for sale. silver or black. pm me for price.

Would thay last a wile? and could you give me a link to them so i know what diffs your talking about? Thanks!

[_paralyzed_]

Would thay last a wile? and could you give me a link to them so i know what diffs your talking about? Thanks!

http://www.rc-monster.com/proddetail...zerdiff&cat=45

there's the diffs^^^^ and below is an auction(not mine) of what the cases look like

http://cgi.ebay.com/2-Integy-Aluminu...3A1%7C294%3A50

Yeah, they'd last a while.......