Looking at the Novak Power module for my mm esc...good or bad?

[magman]

I plan on using a ccbec. I was just looking at taking more temps./pressure off of the esc, that's all

[lincpimp]

Originally Posted by magman

I plan on using a ccbec. I was just looking at taking more temps./pressure off of the esc, that's all

May not really be worth it. I use the std novak caps that came with the old hvmaxx, not the new transorb ones. Kinds makes the esc big and you have to find a place to put the cap.

[_paralyzed_]

is the cap mike sells good for an mm on 4s and above?

[lincpimp]

Originally Posted by _paralyzed_

is the cap mike sells good for an mm on 4s and above?

Post a link you lazy bastid...

[_paralyzed_]

Originally Posted by lincpimp

Post a link you lazy bastid...

here's your link- http://www.rc-monster.com/proddetail...=35vcap&cat=21

on a side note: I believe you will be docked 2 merit points Linc, as a super member you should have the store inventory memorized

[rchippie]

Originally Posted by _paralyzed_

here's your link- http://www.rc-monster.com/proddetail...=35vcap&cat=21

on a side note: I believe you will be docked 2 merit points Linc, as a super member you should have the store inventory memorized

Does this cap replace the stock cap on a mm , or is it a addition to the stock cap ?.