8cell A123 on MMM? - RC-Monster Forums

_paralyzed_ · 12.31.2008, 04:10 PM

Quote:

Originally Posted by pedeboi364

...not to mention the voltage of a fully charged pack vs. nominal voltage. I know u said not to do this, but have u tried the luntach 10s ESC??

you mean the esc the size of texas?

BrianG · 12.31.2008, 04:24 PM

Quote:

Originally Posted by _paralyzed_

you mean the esc the size of texas?

Come on now. Aren't we exaggerating a little? Everyone knows those ESCs are only the size of a small state.

Anyway, I would not run the MMM with any voltage past 6s. Patrick has stated that there is a components that will fry if over 26v IIRC. So, I would stick to 6s lipo (25.2v peak @ 4.2v/cell), 7s A123 (25.2v peak at 3.6v/cell), or 18 NiXX cells (25.2v peak @ 1.4v/cell).

snellemin · 01.01.2009, 08:12 PM

Quote:

Originally Posted by BrianG

Come on now. Aren't we exaggerating a little? Everyone knows those ESCs are only the size of a small state.

Anyway, I would not run the MMM with any voltage past 6s. Patrick has stated that there is a components that will fry if over 26v IIRC. So, I would stick to 6s lipo (25.2v peak @ 4.2v/cell), 7s A123 (25.2v peak at 3.6v/cell), or 18 NiXX cells (25.2v peak @ 1.4v/cell).

Actually it's the size of Jamaica

and you don't need a fan either

I'm testing the 120A esc(size of a McDonald's Bigmac) of Lutach and that little suckers takes 7s A123 like a champ, running the 1512 2y.