Losi 1/8 Xcelorin system vs. MMM and a Neu

[marzac2]

Please dont get it for 6S!!!

It worked fine on 6S (with a clutch set-up from Tekno RC), but Losi does not recognize this in their programming. It will not cut-off at low voltage properly. And this will lead to LiPo failure. If they adjust the software for this ESC, it could work with 6S.

Right now though, it would be much smarter to get an ESC that can be set to cut-off at a 6S voltage level, like the MMM.

[florianz]

ok, thanks. I either get myself the mmm or the scorpion commander, which seems to have a car modus and a programming-card. reading lutach's review the esc seems pretty ok. and 120a seem to be suffiecient, at least not more than the mmm has.

for me here in germany it's easier and cheaper on the bottom line, to order such things in HK thean in the states.

[lutach]

Originally Posted by florianz

ok, thanks. I either get myself the mmm or the scorpion commander, which seems to have a car modus and a programming-card. reading lutach's review the esc seems pretty ok. and 120a seem to be suffiecient, at least not more than the mmm has.

for me here in germany it's easier and cheaper on the bottom line, to order such things in HK thean in the states.

The car mode in the Commander doesn't work properly. The unit I received only had reverse working and I had to add a heat sink to keep it from over heating. Its a nice ESC specially being what seems to be the first with a switching BEC, IR Programming.