wow!!! this esc is really huge!!!!

[jhautz]

Just slap some wheels right on the ESC. Who needs a chassis with an ESC that big. lol

[_paralyzed_]

Not to take anything away from lutach's esc, but comparitively the hobbywing aint so big

also shrink this darn pic!

[e-mike]

CRAP!!!!!!!!!i can't apply a very low trottle,,,a big cogging appear at mid trottle and my motor come really hot!!!!!!!i try every setting as possible ans nothing to do....not smooth like a mmm... o yes....


my set-up e-maxx geared 24/62,1515 1500kv 6 cell lipo

[tntpower]

Got mine too, here's some pics vs mamba max:

[MTBikerTim]

Originally Posted by e-mike

CRAP!!!!!!!!!i can't apply a very low trottle,,,a big cogging appear at mid trottle and my motor come really hot!!!!!!!i try every setting as possible ans nothing to do....not smooth like a mmm... o yes....


my set-up e-maxx geared 24/62,1515 1500kv 6 cell lipo

That is curious because we had similar issues trying to run an outrunner off that same esc. We actually fried the outrunner. It was working fine on another esc and then on that one smoke.

[e-mike]

Originally Posted by MTBikerTim

That is curious because we had similar issues trying to run an outrunner off that same esc. We actually fried the outrunner. It was working fine on another esc and then on that one smoke.

i just hope that we are the only guy's who have this issue....so i shipped the bad unit today for a replacement.....but my friend had one(150amp)and it un flawlesslyso i put it back a mmm in my truck

[hailmick]

Originally Posted by e-mike

CRAP!!!!!!!!!i can't apply a very low trottle,,,a big cogging appear at mid trottle and my motor come really hot!!!!!!!i try every setting as possible ans nothing to do....not smooth like a mmm... o yes....


my set-up e-maxx geared 24/62,1515 1500kv 6 cell lipo

have you tried a 2 pole motor yet ill assume you used a 4 pole when you had the problem

[e-mike]

Originally Posted by hailmick

have you tried a 2 pole motor yet ill assume you used a 4 pole when you had the problem

i try a lot of thing,,3 or 4 cell lipo,other motor(feigao and a 1515 2,5d),,ive played with the timing,change the receiver and the transmetter,so nothing to do the esc cog at mid trottle and mu motor come hot really fast

[Raze ST Truggy]

Originally Posted by e-mike

i try a lot of thing,,3 or 4 cell lipo,other motor(feigao and a 1515 2,5d),,ive played with the timing,change the receiver and the transmetter,so nothing to do the esc cog at mid trottle and mu motor come hot really fast

Has anything come of this yet? Have you recieved a new ESC, are they giving you the run-around? I'm looking at the 80A version to run in a buggy on 4S Lipo with a Medusa 60mm 2000kv motor.

-Brian

[e-mike]

Originally Posted by Raze ST Truggy

Has anything come of this yet? Have you recieved a new ESC, are they giving you the run-around? I'm looking at the 80A version to run in a buggy on 4S Lipo with a Medusa 60mm 2000kv motor.

-Brian

nada never received my replacement

[florianz]

Originally Posted by e-mike

nada never received my replacement

thats poor.
I don't know, are the caps ok, maybe you change then and thake some real good ones.