Ofna Jammin X1CR

[fastbaja5b]

I tried looking but I could not for the life of me find them, any chance someone can point me in the right direction?

Also on the RCM pinions, I tried them on the E-Savage (32p) and on the Medusa shaft they simply would not slide on, every other 5mm pinion I had (Kershaw, Novak) would but not the RCM, even with some rubber mallet encouragement, so I am a little iffy on their pinions fitting the medusa shafts easily.

[Sower]

Here's the 44t spur gear:

http://www.rc-monster.com/proddetail...YOIF147&cat=40

And here's the 46t spur gear:

http://www.rc-monster.com/proddetail...YOIF148&cat=40

About the pinions - 5mm is 5mm so I have no idea why you're having trouble. I've never heard of anyone having this challenge. Sounds like the wrong size.

[fastbaja5b]

Ok thanks, Novak says their pinions are hardened so they "should" work with the metal spur? Not sure how noisy it should be though.

[masense]

Originally Posted by Sower

Here's the 44t spur gear:

http://www.rc-monster.com/proddetail...YOIF147&cat=40

And here's the 46t spur gear:

http://www.rc-monster.com/proddetail...YOIF148&cat=40

About the pinions - 5mm is 5mm so I have no idea why you're having trouble. I've never heard of anyone having this challenge. Sounds like the wrong size.

hi!
i have XT8.
Does Kyosho nylon spur fit xt8 center spur gear?

[Sower]

Yes, I run the 44t on mine. You have to slightly modify the holes, but not much at all. Just a small round file will do. I've had mine on for over a year and never a drop of leaking.