Getting the mod itch

[Revo_Troop]

1 x Pro-Line Premium Blend CA Tire Glue (Medium, 15-20 sec) - $8.49

1 x Traxxas 17mm Wheel Hubs & Nuts (Blue) (4) - $21.49

2 x Pro-Line Badlands MT Monster Truck Tire (2) - $46.98

1 x JConcepts Rulux 1/8th Truck Wheel 1/2" Offset (White) (4) - $17.49

ok this is my final descion...I think...lol

how will this work out? I'm guessing I will have to stretch the tire Im willing to give that a try...where can I read up on the taping of the inner tire because Im having ballooning issues now and expect this will continue...

[skellyo]

Originally Posted by Revo_Troop

2 x Pro-Line Badlands MT Monster Truck Tire (2) - $46.98

1 x JConcepts Rulux 1/8th Truck Wheel 1/2" Offset (White) (4) - $17.49

how will this work out? I'm guessing I will have to stretch the tire Im willing to give that a try...

You'll only have to stretch the tire if you buy the half-ups versus the standard version.

Standard: http://www3.towerhobbies.com/cgi-bin...?&I=LXTTD0&P=7
Half-Ups: http://www3.towerhobbies.com/cgi-bin...?&I=LXTTD6&P=7

[madmaxx]

the J concept's rulux 1/2 up's are LPR size and will require the MT sized badland to be stretched on, you will not need to stretch the badland's onto the maximizer's, also you will not need to use CA glue with the beadlock's, they hold. TRUST ME!

flip the tire inside out, clean with rubbing alcohol and apply duct tape to the center (treaded portion) of the inside of the tire....

diff oil's can aid in tire ballooning as well....