Top Fuel Dragster Conversion - RC-Monster Forums

rckcrwlr · 02.17.2009, 02:42 PM

Quote:

Originally Posted by SunnyHouTX

BTW, for the way the rear end is set up, I'd recommend a direct drive system which is very easy and cheap to do. You don't need any more than 3S to get a very quick dragster. With a motor of around 4000kV, and a 3S lipo around 2000mAH, you will get in the 1.7sec ET range around 65 - 70 mph in the alotted 132ft. You will only have to play with tire diameter to go faster.

I like the way you are talking...

mohanjude · 02.17.2009, 02:48 PM

I did a conversion by adding the rear end of a traxxas rustler - runs really well on a brushless motor - if you are interested I will get some pictures. It really is a blast to drive

Mohan

rckcrwlr · 02.17.2009, 02:50 PM

Quote:

Originally Posted by mohanjude

I did a conversion by adding the rear end of a traxxas rustler - runs really well on a brushless motor - if you are interested I will get some pictures. It really is a blast to drive

Mohan

Interesting...I have a VXL Pede tranny sitting in my box of "stuff"... Let me see whacha got...