RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
Old
  (#1)
B4maz
Guest
 
Posts: n/a
02.24.2009, 12:24 PM

There are a bunch of 1/8 conversions out there. I did one and so did these guys.
   
Reply With Quote
Old
  (#2)
jhautz
RC-Monster Mod
 
jhautz's Avatar
 
Offline
Posts: 4,217
Join Date: Apr 2006
Location: Chicago, IL
02.24.2009, 06:53 PM

Good luck... IMO its gonna be hard to beat one of them little 1/10 on roads in a drag race. Those things just scoot!!! The power to weight ratio on them is insane. Just put a 3 cell lipo one with the right tires and in my opinion a little more weight than you would use for a road race to increase the traction for better acceleration and you will be all set. Tyring to make a 1/8 accelerate like the 1/10 will be tough.

If you insist on going with the 1/8 find the widest and softest tires you can get on the thing for maximum traction. Dont forget the traction compound for the tires too, and something to heat the rubber with right before you toss it down to run it. Traction will be your biggest challange in straight line acceleration.


I can't decide if its more fun
to make it...
or break it...


Silent...But Deadly


   
Reply With Quote
this might work for you
Old
  (#3)
jahno30
RC-Monster Stock
 
Offline
Posts: 15
Join Date: Sep 2007
this might work for you - 02.27.2009, 12:09 PM

your best uption would be to try and use an onroad 1/8 and convert that to brushless ...... sick speeds and may even match the 1/10 for excelleration.

I have 2x of the prp's that i'm gonna convert myself....

there wy less expensive then the megens, kyosho,and serpent, but performance is the same :-)

http://www.powerracingrc.com/images/xr8/xr8main.jpg

Last edited by jahno30; 02.27.2009 at 12:11 PM.
   
Reply With Quote
Old
  (#4)
snellemin
2 KiloWatt RACER
 
snellemin's Avatar
 
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
03.23.2009, 09:34 AM

Quote:
Originally Posted by jhautz View Post
Good luck... IMO its gonna be hard to beat one of them little 1/10 on roads in a drag race. Those things just scoot!!! The power to weight ratio on them is insane. Tyring to make a 1/8 accelerate like the 1/10 will be tough.Traction will be your biggest challange in straight line acceleration.
I'm with Jhautz.


6 KiloWatt A123 Racer
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc.
24s2p EVG SX 49.6mph Ebike.
18s4p Raptor 60mph Ebike. 11.5KW
   
Reply With Quote
Old
  (#5)
Byte
Guest
 
Posts: n/a
03.23.2009, 04:49 PM

Quote:
Originally Posted by snellemin View Post
I'm with Jhautz.
I also agree with these 2 guys. I'm working on my Vendetta, trying to get the 62mph (100 km/h) with that thing. I'm running mamba 8000kv, 3 cell LiPo and a Quark Competition 80B ESC. That thing really flies! But it's SO DAMN HARD to control it! I always have to start really slow, or else it will spin, and if I go something like 40-50 mph and trying to go slower the car will spin most of the time

So again: Traction will be the biggest problem


EDIT: What's a gyro? (My english isnt very good)

Last edited by Byte; 03.23.2009 at 04:55 PM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com