Tekin 1/8 Scale controller release date?

[teamtekin]

Originally Posted by TexasSP

Have you used beta testers with a variety of real world applications? I mean everything from hardcore racers to hardcore bashers?

What are the restrictions and/or suggestions for setups using non tekin motors?

I wanted to clarify this last question. Is the controller setup to run 4, 6, or higher pole motors smoothly? What are the limits in these areas? Has testing been done with any outrunners?

We have beat on it pretty good in many setups. Time will tell, but we think we have done all we can to be ready.

Should work fine with any motor including the Neu, CC and Losi motors and all the sensored 1/10 scale long can motors.

We have not done any testing with outrunners. The system does work fine with multi pole motors. We have tested with up to 8 pole motors.

We are going testing tommorrow to get ready for the RCpro series Cabin Fever Race that has a 1/8 buggy class. We set up another new buggy today to add to our test fleet.

[magman]

Originally Posted by teamtekin

We have beat on it pretty good in many setups. Time will tell, but we think we have done all we can to be ready.

Should work fine with any motor including the Neu, CC and Losi motors and all the sensored 1/10 scale long can motors.

We have not done any testing with outrunners. The system does work fine with multi pole motors. We have tested with up to 8 pole motors.

We are going testing tommorrow to get ready for the RCpro series Cabin Fever Race that has a 1/8 buggy class. We set up another new buggy today to add to our test fleet.

thanks for the updates and let us know how the testing went!

[lutach]

[QUOTE=teamtekin;265627]We have tested with up to 8 pole motors.QUOTE]

Where can I get an 8 pole motor Jim?

[Semi Pro]

[QUOTE=lutach;265867]

Originally Posted by teamtekin

We have tested with up to 8 pole motors.QUOTE]

Where can I get an 8 pole motor Jim?

align 600xl and 650l are 8 pole ( still my favorite motor! )

[lutach]

[QUOTE=Semi Pro;265868]

Originally Posted by lutach

align 600xl and 650l are 8 pole ( still my favorite motor! )

Align 600XL and 650L are outrunners first of all and Jim stated he didn't test the ESC with outrunners yet. Also, from what I've been told by Align the 500L, 600L, 600XL and 650L are all 6 pole. To my Knowledge so far I've only seen 2 8 pole inrunners. Neu 17 and 19 series, Plettenberg can make them as well as a 10 pole (Bolido or the 370 line of motors) and there's a guy in Germany (Not surprised here lol) that has made a 8 pole and a 16 pole inrunner (I have pictures of them somewhere, but I can't find it).