150amps hobbywing esc in fire in my house!!!

[jsr]

I've run my EZRuns from 3.75 - 15* timing and from Level 3 to 7 punch without problems. But I didn't go to the extremes. That's a bit scary.

It sounds like the punch settings might be reversed from what it says in the manual. Per the manual, the higher the stting, the more punch (less punch control). But it seems that the lower the setting, the more current it draws which means more punch...contrary to what the manual says. This is the way MMs and MMMs work so it wouldn't be a complete surprise if it does actually work the same as CC ESCs but just written wrong in the literature.

[littlegiant]

ok good news. I've contacted the vendor and he told me to send the damaged esc back to him. he will get it repaired free of charge and return postage will be paid by him.

But it takes 5 days for the esc to reach him, 10 to 15 days and probably a week for it to go back to me. So I am going to have to wait for a month for my esc to be returned to me. That's a long wait. I will probably get a Hw150A and not play with the timing in the mean time.