Hyper 9E

Nice! Can you measure the distance from the face of the motor mount to the radio box?

[Marvin]

Originally Posted by badassrevo

Nice! Can you measure the distance from the face of the motor mount to the radio box?

80mm exactly - though there will be no room for motor wires.

There is a 43T crown gear and 11T pinion - so 3.909...

I don't think you would be able to use a smart diff either - it's not the spur gear size that's the problem, it's more that the diffs are so short - the entire centre diff (spur gear to diff case bottom) is only 18-19mm long!

[crazyjr]

Originally Posted by Marvin

80mm exactly - though there will be no room for motor wires.

There is a 43T crown gear and 11T pinion - so 3.909...

I don't think you would be able to use a smart diff either - it's not the spur gear size that's the problem, it's more that the diffs are so short - the entire centre diff (spur gear to diff case bottom) is only 18-19mm long!

Nice specs, looks like they used a hyper 12 center diff, means there might be a plastic option for the >5 class cars

[Marvin]

The body is just the nitro one, disappointingly. I was expecting something far narrower - so I'm going to make side guards or an undertray out of lexan, otherwise my electrics won't stay clean for very long. Hopefully some aftermarket manufacturer will come up with a 'proper' electric one.