**My FLM CCNeu Maxx Nearly Completed**

[ANGRY-ALIEN]

Hey Kcaz25, where did you get this center shaft and what length are you using?




Alien

[BL_RV0]

Looks good, Zach.

[Kcaz25]

Originally Posted by ANGRY-ALIEN

Hey Kcaz25, where did you get this center shaft and what length are you using
Alien

Here ya go

Thanks BL_RVO

[ANGRY-ALIEN]

Nice... How did you like the fit? Is that a hex screw sticking out of the drive cup... Do you have too much play/movement with the shaft?

Alien

[Kcaz25]

Yeah on both ends. There are other options for solving this problem, but I think this will work nicely.

[ANGRY-ALIEN]

Interesting... looks like a nice and simple fix. Thanks for the info man.

[squeeforever]

Umm...I wouldn't do that. Just use some o-rings in the drive cup...

[Sylvester]

Originally Posted by squeeforever

Umm...I wouldn't do that. Just use some o-rings in the drive cup...

+1
those screws might cause a ton of friction which will heat up your drivetrain some, o-rings would be the best solution.

[ANGRY-ALIEN]

Originally Posted by Sylvester

+1
those screws might cause a ton of friction which will heat up your drivetrain some, o-rings would be the best solution.

I was thinking about the excess vibration it may cause too... would simple rubber/foam inserts work by having them push out on to the shaft?

Alien

[Sylvester]

Originally Posted by ANGRY-ALIEN

I was thinking about the excess vibration it may cause too... would simple rubber/foam inserts work by having them push out on to the shaft?

Alien

Rubber and or foam would work, i personally used gas tubing in between the output shaft and driveshaft and never had a problem.

[mkrusedc]

I use dogbone springs from Tower:

http://www3.towerhobbies.com/cgi-bin...ogbone+springs

[Kcaz25]

Yeah Mark showed those to me on that other forum. Ever since then they've been bookmarked on Tower. I will order them eventually. (Sometimes I get tired of having the same conversations on more than forum. I'm thinking of dropping TRX for this reason and the TRX E-Maxx forum with the exception of a few great Aluminum Maxx projects (mine included) is just full of sad noobs now. And I've kinda graduated from that whole scene) I have gotten a chance to run the truck since the last couple of mods including the monoblock because I'm still waiting on the True Tracks. They should be here this week! VIDS

[Krawlin]

Its looking great Kcaz! So when is it going to get the center diff treatment like mine?

[Kcaz25]

Originally Posted by Krawlin

Its looking great Kcaz! So when is it going to get the center diff treatment like mine?

Thanks Krawlin! Well I'm not quite as handy as you are, so when ever I can get my hands on an RCM CD and mount! whether I have to custom order it or just order it off the site, I will have one! I gotta keep up with the truggies some how! Namely my cousin Brian's 8T! "Blah blah a MT will never hang with a truggy" I don't wanna hear it!

Here we go courtesy of

Originally Posted by ssspconcepts

a>

You here that Mike lol we want it!! I sent a Email about a week and a half ago about the subject of obtaining one. Haven't heard.

[Brian]

Originally Posted by Kcaz25

I gotta keep up with the truggies some how! Namely my cousin Brian's 8T! "Blah blah a MT will never hang with a truggy" I don't wanna hear it!

we'll see