CRT .5 extended chassis body

[magman]

Originally Posted by nougat

I had success with an Associated RC10T4 body. All I had to do was cut a notch for for the wing stay. It's a little short in the back, but I like the look. This is my first paint job, so I kept it real simple.

Loving my brushless crt.5! I've learned a lot from lurking on this forum and this is my setup:

• RC-Monster extended chassis and conversion kit
• Mamba Max ESC
• Traxxas VXL Velineon Motor 15T pinion on 2S for track and 3S for bashing (tried Medusa 36-50-4800kv... great motor, but I didn't think it was worth the extra $$$)
• Revo Hard Anodized GTR front shocks with 1.4 Jato pistons and 1.6 Jato blue springs 30wt shock oil (OFNA DM-1s were big improvement over stock, but not enough travel)
• OFNA big bore front buggy shocks in the rear with 50wt oil and soft springs
• Lunsford titanium turnbuckles and hingpins, including 4x23mm upper arm turnbuckle with beefier rod ends (if only I could get a beefier upper arm).
• OFNA CNC alloy knuckles, c-hubs and rear uprights
• 2.2 truck Gladiators (pictures), Bowties and Holeshots on HPI Scorch wheels
• 1/10 scale truggy wing

Looks very nice!