New software version posted today... - RC-Monster Forums

snellemin · 05.10.2009, 05:22 PM

You don't need a lipo cutoff for A123's. But if you want to, just use the custom setting and set it for 2V per cell.

Helly · 05.10.2009, 05:54 PM

One of my A123 pack seem's bad just coz of a wrong cut-off setting...

i always switch 4S to 5S or 5S to 7S and i am not always near a computer to reprogramme it...

So if the "auto lipo cut off" detect A123 cell, it ll help! ^^

Pdelcast · 05.10.2009, 06:09 PM

Quote:

Originally Posted by Helly

One of my A123 pack seem's bad just coz of a wrong cut-off setting...

i always switch 4S to 5S or 5S to 7S and i am not always near a computer to reprogramme it...

So if the "auto lipo cut off" detect A123 cell, it ll help! ^^

A123 auto cutoff is slated for the next release -- right now the Auto Lipo is only for standard Lipos.

You should set a "custom" cutoff for the A123 cells.

e-mike · 05.10.2009, 06:47 PM

so after reinstalled the new soft everything going flawlessly...anyway my issue was due by a wrong setting in my tx

so the controller seem to better understand the motor at low speed,,less cogg and i really love the option DISABLE THE BEEP!!!

..and now when i go backward and apply trottle to go foward im able to stop the truck slowly..

now its time to have the mm pro for testing this new soft