Emaxx-Revo-Losi 1/5 AWD On-Road racer

[SpeedAssault]

Originally Posted by SnoopMaxx

That shaft will not work

1: The hole in the flat section is only 2mm
2: The flat section is too long
3: The flange in the middle
4: The distance between the holes

They are not like the Traxxas ones

OOPS, I guess it's not as easy to modify. I thought it would need to be grounded to make shorter, drilled, and put in drill press with file to take off the flange. But if the holes are to far apart then it's definitely not worth it.

Thanks for sharing.

cool thing to do is use your axle stubs for this mod and then buy some titanium revo stubs to replace them on the axle.

[SnoopMaxx]

Always do a little R&D

I spend a lot of time looking at pdf files and comparing part numbers
BTW the traxxas ones are $4.79 and the Hpi ones are $7.69 almost double prize

[SpeedAssault]

YEa 1/5 tires !
machining the adapters for them

Center Diff build time
Some parts

Losa 3562 45t spur for the Losi 8 E. a mod1
I took a 43t regular HPI gear and drilled it out to match it up .

Spur pinion Ratio Total ratio 3s speed 6s Speed

49/14 3.5 11.5 28mph 56
49/17 2.88 9.5 36 72
45t/14p 3.21 10.6 32 64
45/12 3.75 12.4 26 52
45/13 3.46 11.4 28 57
44/14 3.14 10.3 31 62
43/12 3.58 11.8 29 58
43/14 3.07 10.15 33 67