Charge adapter for everything

[kulangflow]

Originally Posted by rawfuls

Errrrrrr, isn't 30A too little?
Or is 30A/45A just right for the 6s/2200kV applications?

Nope. As mentioned, I've been using them for years and have never even seen one get above ambient temp. I think the 30A rating is quite conservative.

I will be gradually switching to the 45A contacts once I run out of 30A though because their size makes it easier to install on larger gauge wire.

[_paralyzed_]

Wow! Check out the power supplies at the bottom of the page at that place kulangflow llinked to. 40amps, fused connections, powerpole output, 13.8v $85!

http://www.powerwerx.com/powerpole-power-splitters/

[BrianG]

Originally Posted by _paralyzed_

Wow! Check out the power supplies at the bottom of the page at that place kulangflow llinked to. 40amps, fused connections, powerpole output, 13.8v $85!

http://www.powerwerx.com/powerpole-power-splitters/

You do realize those are splitters, not power supplies right? They just provide multiple outputs for a seperate power supply, but don't actually contain a power supply internally.

[_paralyzed_]

Originally Posted by BrianG

You do realize those are splitters, not power supplies right? They just provide multiple outputs for a seperate power supply, but don't actually contain a power supply internally.

damn confusing literature. It states 12v and 13.8v so I assumed it was for 12v products but actually output 13.8v. It's kind of a rip off now, but was a nice setup when I thought it came w/ a power supply. Oh well