kyosho 46t spur on CRT

[Kyosho]

my 5s is 20c 5000mah. the front part of my diff mount has the spacers i think so if i take those out and use the CR buggy motor mount it should work? and do you know if the gears will mesh, 46/11 pinion to spur? I am on a budget (hence the feigao) and i dont want to change the diffs to 43/10.
this is how i rum my crt now. its a revo mount.


dont laugh at my traxxas Tx/Rx, it works fine! LOL

[riverat1540]

the gears will mesh fine if u can get the motor close enough which should not be a problem, but as a warning u will be geared pretty high if u dont do the diff conversion as well and it will seem to run fine and really fast but that is how i snapped my motor shaft as it will put much more strain on the motor. i was at a 14 t pinion but u are not far off even with an 11 if using what u plan to do i suggest a slipperential or the diff conversion, but it would help if i knew what kv your motor was,lol