Connector Decision

[E-Revonut]

If your having a hard time getting 10ga in a 6.5mm bullet good luck finding anything that'll be easier! IMO 8ga just isn't needed unless your trying to run a 10,000+kv motor on 1s 8000mah+ and trying to break a speed record to boot! Even 10 gauge is to big for my liking. Increase voltage, decrease amp draw and run 12ga. 12 gauge fits in connectors much easier and bends easier and in the long run just looks cleaner IMHO. I actually had LincPimp take the 10ga off my NeuEnergy packs and put 12 on them.