eagletree in my buggy

[NoControl]

This is a very interesting question, I've used the other datalogger (novaks sentry pro) and its current meter max's out at 100A as well, however I have used on a revo with 2 3s 5k zippies wired in parallel and a MMM 2650kv, geared for 30-35 and the loger says that I have peaked out at 105A from time to time, and from what I've read revo's tend to suck up the power which is why CC suggests packs that can discharge 120A cont, could this mean that the current draw exceeded the loggers rating but still gave a max reading that wasn't the actual maxium reading but just the max that the logger could register? Also if anyones curious on run times ~28min of hard off road runing in grass, with lots of braking, rev, and acceleration.