 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster RC8T
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
|
07.24.2009, 02:45 PM
With the switching type bec in the newer escs there is no additional heat, or at least not enough to be of concern
SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 405
Join Date: Jun 2007
|
07.25.2009, 03:20 PM
Ok, I believe I've decided on 5S 5000mah lipos for the truggy and a 1600-1700kv motor. I currently have a MMM and Medusa 60x2000 on 4S in my 1/8 buggy and it runs great, but seems to have 2-stroke power band. A small pull on the throttle is not much, but a bit more pull and it over jumps.
The two systems I'm deciding on are: 1. MMM & Medusa 80 x 1600kv on 5S 2. Tekin RX8 & Tekin 1700kv truggy motor on 5S The MMM & Medusa has been very reliable, but lacks a bit in finese on the race track. I also like the idea of having two of the same ESCs. However, I'm interested in trying the Tekin system forseeing that I can get one with the new rotor. What do you think? E-CRT.5 Stock - Sidewinder/4600/2s, buggy tires E-8ight - Tekin RX8 2000kv/4S E-8ight T- Tekin RX8 1700kv/5S |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
