Homemade brushless baja

[lincpimp]

Originally Posted by gyn77

I also thought to buy 23mm hex, but the problem was that I cannot replace the same Front Width 18.1" (460mm) and Rear Width 18.9" (480mm) of baja because savage braces are not so long as baja braces.
So I thought homemade adaptor was the best way.

Good point, I was looking for equal track width on my 5t so that should not be an issue.

[zeropointbug]

Nice ride, how long have you been working on it?

[Ryu James]

what kind of motor temps do you see on the 1521 pushing that 7kg baja? and what is your gearing?

looks great by the way. just wanting to pick your brain to gain as much info as i can for projects i am doing/planning to do.

[gyn77]

Originally Posted by Ryu James

what kind of motor temps do you see on the 1521 pushing that 7kg baja? and what is your gearing?

looks great by the way. just wanting to pick your brain to gain as much info as i can for projects i am doing/planning to do.

Neumotor 1521 got 67 C° at max after strong use on grass/dirty/stones and external temperature of about 30 C°.
My gearing is: spure gear 47, pinion gear 14 with center differential.
I want to see how it will get hot with bigger original baja tires.

[gyn77]

Originally Posted by zeropointbug

Nice ride, how long have you been working on it?

About a week (3 hours/day) for planning and making the chassis and a complete day to assembly and adapting all the other parts.