elc. conversion project done right... with an 808

[whitrzac]

Originally Posted by RBMike

I got my MBX6 down to 7 lbs, 4oz. The X-ray is a little lighter stock so you should be able to do it. I have a Tekin ESC & 1400 motor run off of a 6S 2600mAh Hyperion G3 (405 grams). Losi battery tray (lightened & modified). Some aluminium axles & ty screws.

run times???

TI screws are a little out of my price range

[RBMike]

Originally Posted by whitrzac

run times???

TI screws are a little out of my price range

Run time at medium large outdoor track is around 15 minutes.

TI screw kits for Mugen are about $75.

In a typical 5 minute qual with 1.5 to 2 minutes of warm up I burn around 950mA.

On an 85 deg day, motor= about 120 to 130 deg, ESC w/no fan= about 130 to 140 & cells around 110.

[whitrzac]

Originally Posted by RBMike

Run time at medium large outdoor track is around 15 minutes.

TI screw kits for Mugen are about $75.

In a typical 5 minute qual with 1.5 to 2 minutes of warm up I burn around 950mA.

On an 85 deg day, motor= about 120 to 130 deg, ESC w/no fan= about 130 to 140 & cells around 110.

how much weight did they shave off???