What truggy to build.

[magman]

Well you were asking about a mbx-5T so here is mine I recently finished...

I am running a cc/neu 2200kv w/mmm esc on 5s. This is the second Mugen I own and have converted...they are built like tanks

Originally Posted by magman

Well you were asking about a mbx-5T so here is mine I recently finished...

I am running a cc/neu 2200kv w/mmm esc on 5s. This is the second Mugen I own and have converted...they are built like tanks

what did you use to convert that one? looks great! Badlands rule

[magman]

Originally Posted by 88gtanotchback

what did you use to convert that one? looks great! Badlands rule

Believe it or not, it is a stock 5T chassis. I bought a Mugen motor mount from Mike and had him make me a custom tray to fit those specific batts....that's it, very simple to do.

Almost forgot, the esc. mount is this one....just drill 3 small holes and countersink the ends and you are done. The mmm sits perfectly on it. http://www3.towerhobbies.com/cgi-bin...?&I=LXVEC2&P=7

Here is a so so pic of the esc w/that mount....

Originally Posted by magman

Believe it or not, it is a stock 5T chassis. I bought a Mugen motor mount from Mike and had him make me a custom tray to fit those specific batts....that's it, very simple to do.

Almost forgot, the esc. mount is this one....just drill 3 small holes and countersink the ends and you are done. The mmm sits perfectly on it. http://www3.towerhobbies.com/cgi-bin...?&I=LXVEC2&P=7

Here is a so so pic of the esc w/that mount....

I really appreciate your help. your build is super clean yet very effective. i like that you use zippy's too(it looks like one at least). every other board i go on poo poo the idea when i tell them i run zippy's in my flux. i love em! You dont happen to have any video of it running do you? what lipo is that? thanks for your help, definetely the guidance i needed on this project.