Novak HV 6.5-Issue help needed!

[suicideneil]

Hmm.

If you are using a single 4s lipo with the normal dual battery leads, are you also using a jumper plug connected to the un-used input? Heres how you should have it wired up:


Just pretend its a hvmaxx esc with one motor.

Otherwise, how do you have it wired up normally? I wired my old hvmaxx esc up to use a single 4s lipo back in the day, and it worked fine; I can only imagine something isnt wired correctly. If this is a newer hvmaxx pro (black heatsinks), then check the esc's LVC setting too.

Cant say it should be a BEC issue, even on 4s lipo the internal one only gets a bit warmer than normal- unless the servo you have is some un-Godly digital thing that eats up the amps?..

Ok, yea I dont have it with me.. but mine is very similar to that.. something like this:

But Its like that, but maybe the otherway round.. sorry its not great
That is the way I got it.. that works but will do the stoping. I tried it the single way-As far as im aware 100% correct and esc wouldnt go on.
Its in a RC8 Conversion cheers

Guys