RCM E-RVO Couplers

[suicideneil]

V3 has an 8mm input shaft turned down to 5mm as it exits the diff case, so the hole in the coupler is 5mm- you will need V2 model for your LST2 diffs :)

[Bondonutz]

Originally Posted by suicideneil

V3 has an 8mm input shaft turned down to 5mm as it exits the diff case, so the hole in the coupler is 5mm- you will need V2 model for your LST2 diffs :)

Your awesome Neil, Thank You Sir.