Size motors to use with MMP

[Riko]

lol so, can somebody sum up for noobs? :D

MMP (1/10 esc) + small motor (for 1/10) = good combo
MMp esc + larger motor (2200kv) = bad...because

MMM (1/8 esc) + small motor (for 1/10) = bad...cause
MMM + larger motor (2200kv) = good combo

[Unsullied_Spy]

Originally Posted by Riko

lol so, can somebody sum up for noobs? :D

MMP (1/10 esc) + small motor (for 1/10) = good combo
MMp esc + larger motor (2200kv) = bad...because

MMM (1/8 esc) + small motor (for 1/10) = bad...cause
MMM + larger motor (2200kv) = good combo

MMP + Larger motor = Bad when used in the wrong setup, in 1/8th setups I'd use it only on 6s with lower KV motors when your peak power output is less than 2,000 watts (keep the amps down).

MMM + Small motor = OK. Small motor + big truck = bad. You won't hurt a motor or ESC by using an overkill ESC.

[Riko]

Originally Posted by Unsullied_Spy

MMP + Larger motor = Bad when used in the wrong setup, in 1/8th setups I'd use it only on 6s with lower KV motors when your peak power output is less than 2,000 watts (keep the amps down).

MMM + Small motor = OK. Small motor + big truck = bad. You won't hurt a motor or ESC by using an overkill ESC.

okay, thx dude!