So don't hit walls at WOT? - RC-Monster Forums

vader2728 · 06:03 PM

Here's some pics of my most recent crash... Was about 50 yards away and runnin the E-maxx at WOT and out of nowhere comes this building... I had heard reports of a stray one roamin around in the park where we were bashin but I thought the noise of pinion mesh and Mamba Monster beeping all over would scare off any undesireables... Anybody ever have a Ti hingepin break into 5 pieces like this? Maybe I'm special after all!

On to the pics... Meant to post this in the E-Maxx forum but it does have an FLM chassi in it... I guess it fits here too...

Semi Pro · 11.20.2009, 07:17 PM

this year i did crash my carbon fiber 8ight into the ground at about 40mph (Newton's Three Laws of Motion shouldnt apply to flying buggys) i bent a titanium hindge pin into a U shape, but i havent ever broken one into pieces

_paralyzed_ · 11.20.2009, 09:43 PM

the pictures are good proof but the logic seems flawed. Can anyone else verify that you should NOT run into buildings at WOT?

side note: I love the acronym WOT. I sometimes roll around making wide open throttle noises while saying "wot". WOT WwoTT WWWOOOOTTTTTTT WOTT WOTT WOTT WooooOOOOOOOOOOOOTTTTTTTTTTTTT (shift) WWOOTTTTT WWOOooootttttttTTTTT (shift) WWWWWOOOOOOOTTTTT
etc., etc.........................

vader2728 · 11.20.2009, 09:51 PM

The GA bulks with a broken Tony's screw in it might be a lil more proof... Or the way I had to use the dremel to cut what was left of the hingepin out... The parts left in the bulkhead were both mushroomed out on the inside so i had to push them towards each other and cut the swollen ends off... Ha... I just used mushroomed and swollen in the same sentence... On a side note, Ti sparks are awesome!

JThiessen · 11.20.2009, 10:05 PM

Quote:

Originally Posted by vader2728

On a side note, Ti sparks are awesome!

You probably didn't know that ahead of time.....grinding Ti is not a good idea...

magman · 11.20.2009, 10:07 PM

I have run into stationary objects w/my buggy at WOT several times...never w/good results

Kcaz25 · 11.20.2009, 10:08 PM

Gnarly! GA bulks are tough!

vader2728 · 11.20.2009, 10:23 PM

Not good? Oopsie! Is cutting considered the same as grinding?

O well, if the smoke from the casino I work in don't kill me I can blame it on Ti dust!

vader2728 · 11.20.2009, 10:29 PM

@ kcaz25... 7075 bulks with Strobe braces, k'heads, UE EXT 15mm suspension, Ti skids (that I havent cut or grinded), Gen IV saver and Ti steerin links is pretty tough! I guess the Maximizer beadlock, the hingepin and the broken screw were a pretty good tradeoff for what coulda broke

!

Kcaz25 · 11.20.2009, 11:55 PM

Quote:

Originally Posted by vader2728

@ kcaz25... 7075 bulks with Strobe braces, k'heads, UE EXT 15mm suspension, Ti skids (that I havent cut or grinded), Gen IV saver and Ti steerin links is pretty tough! I guess the Maximizer beadlock, the hingepin and the broken screw were a pretty good tradeoff for what coulda broke

!

No doubt, I think I've seen your truck on UE.

vader2728 · 11.21.2009, 12:04 AM

I cant remember if I ever posted the finished product or not... I've been busy breakin, er playin with it

... The E-Maxx too...

JThiessen · 11.20.2009, 10:41 PM

Cutting is different. On second thought, with the size of the hinge pin and speeds the dremel is only capable of, there really isn't much danger, just a lot of white sparks.

Issues come up when people use the same grinder for different materials - especially aluminum. Aluminum will embed in the grinding wheel, and once it heats up, can cause the wheel to explode.

Slowkrawl · 11.20.2009, 10:55 PM

Quote:

Originally Posted by JThiessen

Cutting is different. On second thought, with the size of the hinge pin and speeds the dremel is only capable of, there really isn't much danger, just a lot of white sparks.

Issues come up when people use the same grinder for different materials - especially aluminum. Aluminum will embed in the grinding wheel, and once it heats up, can cause the wheel to explode.

I'm a welder and I have never heard that before in my life. I've used a disk covered in alum. to grind steel lots of time, no blown up disks. Unless you have personally seen it happen, I think whoever told you that is full of shit lol.

On that note though...wierder things have happened, pure oxygen and oil has been known to explode.

_paralyzed_ · 11.20.2009, 11:03 PM

I spontaneously combusted once...

magman · 11.20.2009, 11:09 PM

Quote:

Originally Posted by Slowkrawl

I'm a welder
On that note though...wierder things have happened, pure oxygen and oil has been known to explode.

I also weld and weird things have happened to me as well. Pure Oxygen and petroleum products don't always mix..