Another Erevo 5B !!!

[JThiessen]

Originally Posted by brushlessboy16

Traxxas hubs have the spline, and 5b's use a 24mm hub, either way its something custom

Ah - they do have the spline on them dont they. Yeah, that 23 was supposed to be 24.....

[Overdriven]

Nice job. I gotta post some pics of my Revo-5b. Made some changes, started on the cage since it was last seen.

I'm wondering about the 24mm hexes as well. More info please?

[brushlessboy16]

Originally Posted by JThiessen

Ah - they do have the spline on them dont they. Yeah, that 23 was supposed to be 24.....

I see no spines on the hubs

[Helly]

Thanks all for your interest!

To suicideneil: you right, it's a 5T

The rear center driveshaft is huge ! Did you make it yourself ?
You won't use a skid to protect it ?

Yes it's a homemade driveshaft with juste a aluminium tube between classic revo shaft and two screw to hold them...

for the hub, i forget to add this pic: (it's just 23mm hub with around 0.4mm plate to add the extra 1mm!

[lincpimp]

Originally Posted by Helly

for the hub, i forget to add this pic: (it's just 23mm hub with around 0.4mm plate to add the extra 1mm!

1st time I have seen this done, but I have thought for a while that it would work fine. Just finding stock that is the correct thickness, looks like brass shim stock you are using?

[JThiessen]

Originally Posted by brushlessboy16

I see no spines on the hubs

I meant on the traxxas version - not these...

[Helly]

It seems to work very well!!! lool

Neu 1515 2D with 7s2p A123 batterys... tone of power!!
temp motor: ~120-140°
temp mamba: don't really know but the fan never turn!

Ok we are in winter, but it seems really performant!

I have juste some probleme with the front shock oil... front shock really have hard time... (8kg for the complete beast)