9xl vs. castle 2200 motors

[Bondonutz]

Originally Posted by notnodak

Can I still use my MM? I am sending in one burnt MM for MMPro upgrade. I suspect that would work better, right? Would the 2600 be better on 4 cells or is the heat gunna kick in again?



One last brain picking. Can I safely run a 6-cell 2200 combo on a MMPro?

Had you stated in your first post about using a MM/MMP the answers you received would have ben quit a bit different. Alway give as much information as possible when asking for help or opinions

What is the RC this is going in ?

You shouldn'r run a Monster 2200 with a MMP unless you really know what your doing. And besides I think I'll void any warrenty ? Someone will chime in that'll know for sure. Anyway, That motor pulls a LOT of Amps and may exceed the ESC's capacity.
The MMP is for 1/10 scale use but I have heard of of it being used in 1/8 buggys with success on another forum but by experienced hobbists.

Also what kind of batterysyou using (This is Very Important) ...

[brushlessboy16]

Originally Posted by notnodak

I run the 9xl but am curious how much better the 2200 Castle motor is. Will it really run that much cooler and more efficient(longer)? I also use a MM w/ UBEC on 4 cells.

Originally Posted by Bondonutz

Had you stated in your first post about using a MM/MMP the answers you received would have ben quit a bit different. Alway give as much information as possible when asking for help or opinions

What is the RC this is going in ?

You shouldn'r run a Monster 2200 with a MMP unless you really know what your doing. And besides I think I'll void any warrenty ? Someone will chime in that'll know for sure. Anyway, That motor pulls a LOT of Amps and may exceed the ESC's capacity.
The MMP is for 1/10 scale use but I have heard of of it being used in 1/8 buggys with success on another forum but by experienced hobbists.

Also what kind of batterysyou using (This is Very Important) ...

He does state that he's usin a MM..