Ofna DM1 Spec Brushless Build

[Jrock2310]

Originally Posted by fastlane01

It's al ready set up single speed. I do have the two speed though.

Can you tell me what all I will need to make mine a single speed and do you know the part number for the diff that you use cause I want to set mine up with the single speed also and thanks for the help this is my first time dealing with a 1/8 conversion

Originally Posted by Jrock2310

Can you tell me what all I will need to make mine a single speed and do you know the part number for the diff that you use cause I want to set mine up with the single speed also and thanks for the help this is my first time dealing with a 1/8 conversion

I will look through the packages I have and post the part #'s for you as soon as I can.

[Jrock2310]

Originally Posted by fastlane01

I will look through the packages I have and post the part #'s for you as soon as I can.

Thanks alot man and that body is sick I mean SICK

[_paralyzed_]

Originally Posted by Jrock2310

Can you tell me what all I will need to make mine a single speed and do you know the part number for the diff that you use cause I want to set mine up with the single speed also and thanks for the help this is my first time dealing with a 1/8 conversion

this is all you need> http://cgi.ebay.com/Ofna-Solid-Cente...item5ad475953e

[Jrock2310]

Originally Posted by _paralyzed_

this is all you need> http://cgi.ebay.com/Ofna-Solid-Cente...item5ad475953e

Thanks alot but are u sure it will fit the dm-1 spec cause it says it's for mbx/ gtp

[_paralyzed_]

Originally Posted by Jrock2310

Thanks alot but are u sure it will fit the dm-1 spec cause it says it's for mbx/ gtp

yes sir

Just looking for an honest veiw on the DM1 would anyone feel that the novak HV pro system would be good enuff for the convertion ? my DM1 will also sport the single speed and i was just thinking would mid 50's be out of reach for the novak system i want the car to be comparible to a DM1 with a 21 ninja , well a tad faster but i dont want the brute torque just the top end i do plan to race and felt the sensored motor make bring some benifits.

[Jrock2310]

Originally Posted by ASYSTEMERROR

Just looking for an honest veiw on the DM1 would anyone feel that the novak HV pro system would be good enuff for the convertion ? my DM1 will also sport the single speed and i was just thinking would mid 50's be out of reach for the novak system i want the car to be comparible to a DM1 with a 21 ninja , well a tad faster but i dont want the brute torque just the top end i do plan to race and felt the sensored motor make bring some benifits.

First off the dm-1 is a great car and depending on your gearing you should get about 55-60 with a 4s but since you changed to a single speed that means you probably have that 51 tooth spur cause I was about to switch to single but I really didn't want all those teeth in my spur. If I were you I probably would go with the mamba monster 2650 if you plan on running 4s..