Medusa kv problem

[E-Revonut]

I Know that roughly the stock Titans are about 1700kv, even though brushed motors aren't rated in kv thats roughly what they work out to be. With the stock gearing (68/19) and 4s lipo a stock E-maxx 3905 is geared to do aprox 25MPH. With a 1600kv motor and 68/20 gearing the speed should be about the same but it's no where close, I'm much closer to 30MPH which if I plug in a 2000kv motor it works out. When I had this motor on my RC8T I always thought I was way faster than what I was geared for and I tried putting in 2000kv then and the speeds I was coming up with seemed much closer to what I was actually doing. This just confirmed it.

I never calibrated the rpm sensor, at least I don't remember doing it, but it started at 0 and came back to zero in live mode

[sikeston34m]

I'm gonna have to play around with live mode and the rpm sensor some more.

What kinda amps are you pulling with your setup?

I'm showing 100 amp peaks on 6S. Right at 2100 watts.