New at Hobby City

[gixxer]

I would like to see them have higher mah packs. 8k would be nice for my 2s 10th scale setups.

[nitrostarter]

Originally Posted by gixxer

I would like to see them have higher mah packs. 8k would be nice for my 2s 10th scale setups.

Considering most 8000+ mah packs are actually 2 packs just paralleled and packaged together. It's actually not a good idea and is problem since you are balance the 2 cells paralleled together as 1 single cells.

Now if they develop a 8000mah single cell, then sure!

[ClodMaxx]

i just noticed this - not sure if it's new or not, but wow is this a must-have!

[Bondonutz]

Just orderd 5 monitor dealie-o'sfor the Hobby Shop I work for and one formyself

Anybody see the 30C 5Kmah Hard packs for $39.99 ???
http://www.hobbycity.com/hobbycity/s..._hardcase_pack

[Krawlin]

Do they have the battery monitor for a 2 pack setup? That would be awesome on my Monster GT. I wonder it it provides real time readings too, so if you nail the throttle, you can see your voltage drop?

EDIT: Never mind, just read that it does provide real time readings. That is awesome. I need one of these but I need one for dual packs....

Seems like a very useful tool though, especially for people who race 1/8 electrics with a single pack.

[nitrostarter]

Originally Posted by Krawlin

Do they have the battery monitor for a 2 pack setup? That would be awesome on my Monster GT. I wonder it it provides real time readings too, so if you nail the throttle, you can see your voltage drop?

All it does is plug into the balance port of the lipo. If you have multiple packs, just get a converter plug that takes you 2- 2s lipos and makes 1 4s lipo plug. Its quite simple to make as well.

[Krawlin]

Originally Posted by nitrostarter

All it does is plug into the balance port of the lipo. If you have multiple packs, just get a converter plug that takes you 2- 2s lipos and makes 1 4s lipo plug. Its quite simple to make as well.

I run two 3S Lipos actually, but same concept. I wasn't sure if I could do that with the balance taps though, but I guess I can. I have a couple 3S connectors from my Equinox balancer, could I just splice one of them to the other and put the correct end connector on?

[skellyo]

Originally Posted by Bondonutz

Anybody see the 30C 5Kmah Hard packs for $39.99 ???
http://www.hobbycity.com/hobbycity/s..._hardcase_pack

I have 4 of those 4S packs on the way. I'll have to snap some pics and give some feedback on here when they come in.

[Bondonutz]

Originally Posted by skellyo

I have 4 of those 4S packs on the way. I'll have to snap some pics and give some feedback on here when they come in.

I grabbed 2 myself, now I guess I can sell a couple older packs ?