quick lipo connector question

[ReV:-O]

Originally Posted by georgec

Just be very careful not to short out the wires! Lipos can't take even the slightest short. Your best bet is to cut strip and solider one wire at a time.

yeah lol when I was soldering my neuenergy lipo i shorted it out twice, i accidently let the two ends touch, and then later they shorted out over the metal pliers! they seem to still work ok 5 months later...



thanks for those tips, i'll keep them in mind. When you say flux, do you mean solder? I'm a bit confused.


cheers