Losi Ten-T Conversion

[hootie7159]

Can't wait to give the other 10th scalers some brushless a$$ kicking!





found these 17mm adapters in my random parts box that fit the ten-t's axles perfectly....just needed some washers to keep the wheels from backing out.....and..these adapters should fit as well

http://www.amainhobbies.com/product_...-T-Maxx-Blue-4

the ID is 6mm but the pin that comes with it is 3mm...you can either drill out the ten-t's axle or use the ten-t's axle pin (its 2.5mm)