Another overkill Truggy : MBX5T MMv3 1520 1Y 6S ;)

[nuz69]

4S 5000mAh setup gives 12-15min in a truggy geared for 40mph, 6S 3300mAh gives a little more for the same speed (better efficiency), so i expect to have at least 20 min runtimes under race conditions. 30 min is the runtimes of bashing, 45min-1H if I walk with the truggy in the park

[nuz69]

Test in track condition done !
19-20min on hard pushing (ratio 15/46) , motor temp after 1 run : 100F (ambient temp was 57F).
This motor has a fantastic amount of torque, it can reach its max RPM instantaneously and with 70% punch control its just soooo smooth :D
I even don't want to gear up, the ratio is just perfect for bashing or racing, and gives me the efficiency I wanted since the beginning of this project :D
Guys told me that my chassis was in fact a "prospec" MBX5T I suppose its bette then a normal MBX5T ???

[ANGRY-ALIEN]

Originally Posted by nuz69

Test in track condition done !
19-20min on hard pushing (ratio 15/46) , motor temp after 1 run : 100F (ambient temp was 57F).

Those are some good times for that big beast... you should post your findings in Talk 1520... good info to have there.

[nuz69]

New video and some photos ;)

http://www.youtube.com/watch?v=dF3EU-2BarI