MMP Blinking yellow neutral.

[Arct1k]

Could be the bec but not sure why it would only impact one mode.

Or could be the lcc hitting with SS pulling more amps.

Do you have a bec to try?

[hoovdog]

Originally Posted by Arct1k

Could be the bec but not sure why it would only impact one mode.

Or could be the lcc hitting with SS pulling more amps.

Do you have a bec to try?

BEC was instantly my thought until I changed to sensored mode. Now I'm not so sure but am going to experiment with that.

I tried a few different packs with no change. Seems odd that it would not do the same or even notice hesitation in either mode if it were pulling too much. That brings up one thing that has me concerned. Novak factory mechanical timing on the motor. It seems high so that is something I am going to lower and see what happens.

I do not have a standalone BEC but plan on getting one just for reasons like this plus it's a nice piece of hardware to have around. One of the things on my "try list" is to pull the pos lead and run a rx pack to eliminate the BEC.