Brushless hpi baja rc-monster

[nitrostarter]

Originally Posted by mohanjude

I had to 2 spare Lehner Brushless 3060 Motors (7 turns) with me. Therefore I wasnt going to buy another Castle 2215. I may reduce the pinion down to about 18 - at present I cannot find my box with the Mod 1.5 pinions... so I am going to try this gear ratio for now with a 20 tooth.

I will try and get a video of the Baja later.

Mohan

Sounds like fun Mohan! You should definitely get some video! Those big Lehners are definitely powerful!

Btw: if you have a spare Lehner sitting around, I can find a use for it...

[mohanjude]

OK guys here is the Video - very short but it shows what the Baja is capable about and how bad my driving is....

I installed a Garmin GPS - as you can see it was reset to 0mph and got to 60 mph in a short burst. I am certain that I did not go past 1/2 throttle max due to my morbid fear of crashing onto the raised pavement slabs.

I will take it out to a more open space and hopefully open it up.