Cleanest E-Muggy On RCM!!!

[MiamizFinest]

Originally Posted by nuz69

What the hell is this pinion gear in this heavy truck ^^
35T ? :D
Don't forget to check the temps

I started with a 16T pinion on with the phatlines but again the wheels sucked, SO i moved to 8th scale buggy wheels and put in a 25T pinion to break even. That heavy puppy was hauling ASS. I put the phatlines back on for the pics but i will not be using that jumbo gear with those big tires , BUT the gear is working well with the buggy wheels. For now anyways until i find a better wheel.

[nuz69]

You mean the wheels vibrated ? unbalanced ?

[MiamizFinest]

Originally Posted by nuz69

You mean the wheels vibrated ? unbalanced ?

They physically didn't hold the speed i blew the wheels off the rims the CA glue just cant hold it. Once the wheels balloon the CA lets go!!

[nuz69]

Maybe try some good truggy wheels, GRP grip for example if you want to run it off road. Did you let the glue a night at calm ?

[bryan]

Looks great , im getting some things together to convert my sons.That looks like a losi 8ight tray your using? How much did you have to do to the chassis to make it work "extra holes" ?

[MiamizFinest]

Originally Posted by bryan

Looks great , im getting some things together to convert my sons.That looks like a losi 8ight tray your using? How much did you have to do to the chassis to make it work "extra holes" ?

for the battery tray nothing was drilled the rear holes lined up fine with the motor mount holes in the chassis. The front hole ALMOST lines up with a hole already in the chassis its about 2MM off but with a 4MM screw threw the hole not only does it clear the hole perfectly it threads itself into the tray on its way up. All in all i only added one hole to the chassis and that was for the radiobox. Pretty simple and clean. I used the ofna radio box for a factory look.