Pics of my FLM Savage Flux XL...Short Course.

[krashkrieg]

Originally Posted by FG101C

Thank you, yea the bulletproofs came with it. Thinking about the FLM shock towers and LST shocks but am going to wait and see how the stock shocks hold up.

Stock shocks are great, I only changed up to metal caps.

[onetoo3]

what servo do you have for steering? I'm looking at HPI SF-50 but do i need all that torque..Big Joe 40

[FG101C]

I'm using a HiTec 7955tg. By the way these trucks are just badass, four packs through it now and nothing but smiles, stock shocks fine not even one leak.

[krashkrieg]

Originally Posted by onetoo3

what servo do you have for steering? I'm looking at HPI SF-50 but do i need all that torque..Big Joe 40

Don't know the rating of that servo, but I would use all the torque you can get with Big Joes (very heavy).

I use a HiTech 7955 (333oz/in) and it'll hold any tires I put on straight and will turn in place on rough concrete no problem.

[onetoo3]

Stock shocks are great, I only changed up to metal caps.

krashkrieg Got a part#, the 7955 looks the same as hpi sf-50 333oz on 6v and cost less.....

[krashkrieg]

Originally Posted by onetoo3

Stock shocks are great, I only changed up to metal caps.

krashkrieg Got a part#, the 7955 looks the same as hpi sf-50 333oz on 6v and cost less.....

onetoo3,

they are the hellfire AL caps these are the ones they sell, no specific ones for savage (only purple) The caps and rear hub carriers are the only things I changed to AL (and FLM XL chassis) anything else that's ever broke (few pcs) was due to a ridiculous crash. This truck is tough as a brick s*** house.

I looked and couldn't find US torque info only kg/cm and don't know how to translate to in/oz
If you did and it's close I'd say go for it!

[JThiessen]

Originally Posted by krashkrieg

I looked and couldn't find US torque info only kg/cm and don't know how to translate to in/oz
If you did and it's close I'd say go for it!

http://www.convert-me.com/en/convert/torque

I use this all the time.

What happened to the pics? I wanna see this so I can decide on a body for my Flux XL