Best setup for Truggy.

[simplechamp]

If you gear both setups for the same speed the lower kv, higher voltage (1700kv on 6S for example) setup will draw less current and you should be able to boost your runtimes a bit and stay cooler.

The 1700kv will do best on 5-6S, the 2250kv best on 4S. If you decide to change later the motors could still be made to work, but it wouldn't be optimal and gearing might be limited.

Thanks for all the info.
Has been a great help.
thinking of going with the Tekin 1700kv motor/combo on 6s.

Was going to run Zippy Flight Max.
Would the 5000mah 6s1P 40C be a good choice for this setup.

Also what would be a good gearing setup for the Truggy be?
At the moment with nitro it is running a 50T Spur and 13T bell.
Want to stay with the 50T spur just not sure what size I need to go to on the motor.

Thanks again.